B0195 Engine Trouble Code
What is B0195?
With B0195, you may drive for several weeks with a malfunctioning MAF sensor, but expect decreased fuel economy and eventual stalling. Shop replacement costs $240–$400 depending on vehicle. The labour is straightforward, with most cost from the part itself.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B0195 |
B0195 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B0195 Code Structure
Understanding what each digit means in the B0195 body trouble code:
| B | 0 | 1 | 9 | 5 |
|---|---|---|---|---|
| Body Code | Intake Valve Control Solenoid Circuit Low | Fuel Rail/System Pressure — Too High | Crankshaft Position Sensor A Circuit Malfunction | Crankshaft Position Sensor B Circuit Malfunction |
How to Fix B0195
Diagnostic Steps:
Poor running symptoms align with MAP sensor malfunction. In some cases, a faulty MAP sensor will not trigger a code. The issue may represent separate wiring concerns requiring individual diagnosis.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on B0195 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
B0195 Description
B0195 engine trouble code is related to Crankshaft Position Sensor B Circuit Malfunction.
Main Cause
The primary reason for B0195 OBD-II Engine Trouble Code is: Fuel Rail/System Pressure — Too High.