B0767 Engine Trouble Code
What is B0767?
B0767 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B0767 |
B0767 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B0767 Code Structure
Understanding what each digit means in the B0767 body trouble code:
| B | 0 | 7 | 6 | 7 |
|---|---|---|---|---|
| Body Code | Intake Valve Control Solenoid Circuit Low | Fuel Rail Pressure Sensor Circuit Malfunction | Cylinder 4 Contribution/Balance Fault | Shift/Timing Solenoid Malfunction |
How to Fix B0767
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Excessive air inflow may result from vacuum leaks, dirty sensors, or EGR valves not closing properly. Insufficient fuel can stem from dirty injectors, clogged filters, weak fuel pump, or leaking pressure regulator.
Technical Notes:
B0767 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
B0767 Description
B0767 engine trouble code is related to Shift/Timing Solenoid Malfunction.
Main Cause
The primary reason for B0767 OBD-II Engine Trouble Code is: Fuel Rail Pressure Sensor Circuit Malfunction.