B1154 Engine Trouble Code
What is B1154?
With B1154, you may drive for several weeks with a malfunctioning MAF sensor, but expect decreased fuel economy and eventual stalling. Shop replacement costs $240–$400 depending on vehicle. The labour is straightforward, with most cost from the part itself.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B1154 |
B1154 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B1154 Code Structure
Understanding what each digit means in the B1154 body trouble code:
| B | 1 | 1 | 5 | 4 |
|---|---|---|---|---|
| Body Code | Fuel And Air Metering | Fuel Rail/System Pressure — Too High | Cylinder 1 Injector Circuit Low | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix B1154
Diagnostic Steps:
Poor running symptoms align with MAP sensor malfunction. In some cases, a faulty MAP sensor will not trigger a code. The issue may represent separate wiring concerns requiring individual diagnosis.
Repair Solution:
Power steering pressure switch monitors system operation. If pressure changes are not detected after calibrated speed transitions, this DTC sets. Verify PSP switch operation and check for circuit opens or shorts.
Technical Notes:
B1154 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
B1154 Description
B1154 engine trouble code is related to Timing Reference High Resolution Signal A Too Many Pulses.
Main Cause
The primary reason for B1154 OBD-II Engine Trouble Code is: Fuel Rail/System Pressure — Too High.