B1344 Engine Trouble Code
What is B1344?
The B1344 check-engine light can indicate issues ranging from minor (loose gas cap) to serious (catalytic converter failure). Professional diagnostic scanning at a dealer or shop will identify the exact cause and required repairs.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B1344 |
B1344 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B1344 Code Structure
Understanding what each digit means in the B1344 body trouble code:
| B | 1 | 3 | 4 | 4 |
|---|---|---|---|---|
| Body Code | Fuel And Air Metering | Throttle/Pedal Position Sensor/Switch A Circuit Intermittent | Injection Pump Fuel Metering Control 'B' High | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix B1344
Diagnostic Steps:
Check if fuel pump primes when key is turned to ON. Measure fuel pressure and verify bright white-blue spark at all plugs. Also verify mechanical timing alignment.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on B1344 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
B1344 Description
B1344 engine trouble code is related to Timing Reference High Resolution Signal A Too Many Pulses.
Main Cause
The primary reason for B1344 OBD-II Engine Trouble Code is: Throttle/Pedal Position Sensor/Switch A Circuit Intermittent.