B1950 Engine Trouble Code
What is B1950?
B1950 code can indicate a faulty oxygen sensor, which may eventually damage the catalytic converter (repair cost: $2,000–$2,200). Professional diagnosis costs around $200–$210. Oxygen sensors are often straightforward to replace — check your owner's manual for location and instructions. This issue should be addressed promptly to prevent further damage.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B1950 |
B1950 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B1950 Code Structure
Understanding what each digit means in the B1950 body trouble code:
| B | 1 | 9 | 5 | 0 |
|---|---|---|---|---|
| Body Code | Fuel And Air Metering | Injector Circuit Malfunction - Cylinders | Cylinder 1 Injector Circuit Low | Shift Solenoid E Performance or Stuck Off |
How to Fix B1950
Diagnostic Steps:
Regarding B1950, carefully inspect the wire harness near the intake manifold bracket, best accessed from below near the oil filter. Look for chafing, pinching, or damaged insulation.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on B1950 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
B1950 Description
B1950 engine trouble code is related to Shift Solenoid E Performance or Stuck Off.
Main Cause
The primary reason for B1950 OBD-II Engine Trouble Code is: Injector Circuit Malfunction - Cylinders.