B2117 Engine Trouble Code
What is B2117?
B2117 code can indicate a faulty oxygen sensor, which may eventually damage the catalytic converter (repair cost: $2,000–$2,200). Professional diagnosis costs around $200–$210. Oxygen sensors are often straightforward to replace — check your owner's manual for location and instructions. This issue should be addressed promptly to prevent further damage.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B2117 |
B2117 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B2117 Code Structure
Understanding what each digit means in the B2117 body trouble code:
| B | 2 | 1 | 1 | 7 |
|---|---|---|---|---|
| Body Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | Fuel Rail/System Pressure — Too High | Engine Shutoff Solenoid Malfunction | Shift/Timing Solenoid Malfunction |
How to Fix B2117
Diagnostic Steps:
Regarding B2117, carefully inspect the wire harness near the intake manifold bracket, best accessed from below near the oil filter. Look for chafing, pinching, or damaged insulation.
Repair Solution:
Power steering pressure switch monitors system operation. If pressure changes are not detected after calibrated speed transitions, this DTC sets. Verify PSP switch operation and check for circuit opens or shorts.
Technical Notes:
B2117 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
B2117 Description
B2117 engine trouble code is related to Shift/Timing Solenoid Malfunction.
Main Cause
The primary reason for B2117 OBD-II Engine Trouble Code is: Fuel Rail/System Pressure — Too High.