B3497 Engine Trouble Code
What is B3497?
B3497 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Code: | B3497 |
B3497 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
B3497 Code Structure
Understanding what each digit means in the B3497 body trouble code:
| B | 3 | 4 | 9 | 7 |
|---|---|---|---|---|
| Body Code | Ignition System Or Misfire | O2 Sensor Heater Circuit Malfunction | Crankshaft Position Sensor A Circuit Malfunction | Shift/Timing Solenoid Malfunction |
How to Fix B3497
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Power steering pressure switch monitors system operation. If pressure changes are not detected after calibrated speed transitions, this DTC sets. Verify PSP switch operation and check for circuit opens or shorts.
Technical Notes:
B3497 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
B3497 Description
B3497 engine trouble code is related to Shift/Timing Solenoid Malfunction.
Main Cause
The primary reason for B3497 OBD-II Engine Trouble Code is: O2 Sensor Heater Circuit Malfunction.