C1245 Engine Trouble Code
What is C1245?
The C1245 check-engine light can indicate issues ranging from minor (loose gas cap) to serious (catalytic converter failure). Professional diagnostic scanning at a dealer or shop will identify the exact cause and required repairs.
Code Information
| Code Type: | OBD-II Chassis (C) Trouble Code |
| System: | Chassis |
| Code: | C1245 |
C1245 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
C1245 Code Structure
Understanding what each digit means in the C1245 chassis trouble code:
| C | 1 | 2 | 4 | 5 |
|---|---|---|---|---|
| Chassis Code | Fuel And Air Metering | Manifold Absolute Pressure/Barometric Pressure Circuit High Input | Injection Pump Fuel Metering Control 'B' High | Crankshaft Position Sensor B Circuit Malfunction |
How to Fix C1245
Diagnostic Steps:
Check if fuel pump primes when key is turned to ON. Measure fuel pressure and verify bright white-blue spark at all plugs. Also verify mechanical timing alignment.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on C1245 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
C1245 Description
C1245 engine trouble code is related to Crankshaft Position Sensor B Circuit Malfunction.
Main Cause
The primary reason for C1245 OBD-II Engine Trouble Code is: Manifold Absolute Pressure/Barometric Pressure Circuit High Input.