C2345 Engine Trouble Code
What is C2345?
C2345 code can indicate a faulty oxygen sensor, which may eventually damage the catalytic converter (repair cost: $2,000–$2,200). Professional diagnosis costs around $200–$210. Oxygen sensors are often straightforward to replace — check your owner's manual for location and instructions. This issue should be addressed promptly to prevent further damage.
Code Information
| Code Type: | OBD-II Chassis (C) Trouble Code |
| System: | Chassis |
| Code: | C2345 |
C2345 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
C2345 Code Structure
Understanding what each digit means in the C2345 chassis trouble code:
| C | 2 | 3 | 4 | 5 |
|---|---|---|---|---|
| Chassis Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | Throttle/Pedal Position Sensor/Switch A Circuit Intermittent | Injection Pump Fuel Metering Control 'B' High | Crankshaft Position Sensor B Circuit Malfunction |
How to Fix C2345
Diagnostic Steps:
Regarding C2345, carefully inspect the wire harness near the intake manifold bracket, best accessed from below near the oil filter. Look for chafing, pinching, or damaged insulation.
Repair Solution:
Excessive air inflow may result from vacuum leaks, dirty sensors, or EGR valves not closing properly. Insufficient fuel can stem from dirty injectors, clogged filters, weak fuel pump, or leaking pressure regulator.
Technical Notes:
C2345 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
C2345 Description
C2345 engine trouble code is related to Crankshaft Position Sensor B Circuit Malfunction.
Main Cause
The primary reason for C2345 OBD-II Engine Trouble Code is: Throttle/Pedal Position Sensor/Switch A Circuit Intermittent.