C2350 Engine Trouble Code
What is C2350?
C2350 code can indicate a faulty oxygen sensor, which may eventually damage the catalytic converter (repair cost: $2,000–$2,200). Professional diagnosis costs around $200–$210. Oxygen sensors are often straightforward to replace — check your owner's manual for location and instructions. This issue should be addressed promptly to prevent further damage.
Code Information
| Code Type: | OBD-II Chassis (C) Trouble Code |
| System: | Chassis |
| Code: | C2350 |
C2350 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
C2350 Code Structure
Understanding what each digit means in the C2350 chassis trouble code:
| C | 2 | 3 | 5 | 0 |
|---|---|---|---|---|
| Chassis Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | Throttle/Pedal Position Sensor/Switch A Circuit Intermittent | Cylinder 1 Injector Circuit Low | Shift Solenoid E Performance or Stuck Off |
How to Fix C2350
Diagnostic Steps:
Regarding C2350, carefully inspect the wire harness near the intake manifold bracket, best accessed from below near the oil filter. Look for chafing, pinching, or damaged insulation.
Repair Solution:
Brake switch circuit concerns may involve open or shorted BPP circuits, damaged switches, or misadjustment. Verify stoplight function and follow proper self-test procedures per service manual.
Technical Notes:
C2350 DTC indicating a sensor fault does not always mean the sensor itself is bad. The issue may stem from the systems being monitored or even the sensor wiring. Proper diagnosis is essential.
C2350 Description
C2350 engine trouble code is related to Shift Solenoid E Performance or Stuck Off.
Main Cause
The primary reason for C2350 OBD-II Engine Trouble Code is: Throttle/Pedal Position Sensor/Switch A Circuit Intermittent.