C2676 Engine Trouble Code
What is C2676?
C2676 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Chassis (C) Trouble Code |
| System: | Chassis |
| Code: | C2676 |
C2676 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
C2676 Code Structure
Understanding what each digit means in the C2676 chassis trouble code:
| C | 2 | 6 | 7 | 6 |
|---|---|---|---|---|
| Chassis Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | Fuel Temperature Sensor B Circuit Range/Performance | Cylinder 10 Contribution/Balance Fault | Ignition Coil A Primary/Secondary Circuit Malfunction |
How to Fix C2676
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on C2676 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
C2676 Description
C2676 engine trouble code is related to Ignition Coil A Primary/Secondary Circuit Malfunction.
Main Cause
The primary reason for C2676 OBD-II Engine Trouble Code is: Fuel Temperature Sensor B Circuit Range/Performance.