C3358 Engine Trouble Code
What is C3358?
C3358 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Chassis (C) Trouble Code |
| System: | Chassis |
| Code: | C3358 |
C3358 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
C3358 Code Structure
Understanding what each digit means in the C3358 chassis trouble code:
| C | 3 | 3 | 5 | 8 |
|---|---|---|---|---|
| Chassis Code | Ignition System Or Misfire | Throttle/Pedal Position Sensor/Switch A Circuit Intermittent | Cylinder 1 Injector Circuit Low | Clutch Position Sensor Circuit Malfunction |
How to Fix C3358
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Most manufacturers number cylinders sequentially from front to back. Ford V-engines start with cylinder 1 at front left. In V-6 engines, cylinder 4 is front right; in V-8 engines, cylinder 5 occupies that position.
Technical Notes:
For C3358, verify VCT solenoid operation. Look for stuck or sticking valves caused by contamination. Consult vehicle-specific repair manual for proper component testing procedures.
C3358 Description
C3358 engine trouble code is related to Clutch Position Sensor Circuit Malfunction.
Main Cause
The primary reason for C3358 OBD-II Engine Trouble Code is: Throttle/Pedal Position Sensor/Switch A Circuit Intermittent.