P0614 Engine Trouble Code
What is P0614?
P0614 code can indicate a faulty oxygen sensor, which may eventually damage the catalytic converter (repair cost: $2,000–$2,200). Professional diagnosis costs around $200–$210. Oxygen sensors are often straightforward to replace — check your owner's manual for location and instructions. This issue should be addressed promptly to prevent further damage.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P0614 |
P0614 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P0614 Code Structure
Understanding what each digit means in the P0614 powertrain trouble code:
| P | 0 | 6 | 1 | 4 |
|---|---|---|---|---|
| Powertrain Code | Intake Valve Control Solenoid Circuit Low | Fuel Temperature Sensor B Circuit Range/Performance | Engine Shutoff Solenoid Malfunction | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix P0614
Diagnostic Steps:
Regarding P0614, carefully inspect the wire harness near the intake manifold bracket, best accessed from below near the oil filter. Look for chafing, pinching, or damaged insulation.
Repair Solution:
Power steering pressure switch monitors system operation. If pressure changes are not detected after calibrated speed transitions, this DTC sets. Verify PSP switch operation and check for circuit opens or shorts.
Technical Notes:
P0614 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
P0614 Description
P0614 engine trouble code is related to Timing Reference High Resolution Signal A Too Many Pulses.
Main Cause
The primary reason for P0614 OBD-II Engine Trouble Code is: Fuel Temperature Sensor B Circuit Range/Performance.