P1068 Engine Trouble Code
What is P1068?
P1068 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P1068 |
P1068 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P1068 Code Structure
Understanding what each digit means in the P1068 powertrain trouble code:
| P | 1 | 0 | 6 | 8 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering | Ambient Air Temperature Sensor Circuit Low | Cylinder 4 Contribution/Balance Fault | Clutch Position Sensor Circuit Malfunction |
How to Fix P1068
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
VSS concerns may stem from noisy input signals caused by RFI/EMI from ignition wires, charging circuits, or aftermarket equipment. Verify VSS reads 0 mph when transmission is in Park.
Technical Notes:
P1068 DTC specifically relates to camshaft timing. When cam timing is over-retarded, the check-engine light illuminates and this code sets. Verify VCT solenoid operation and check for contamination.
P1068 Description
P1068 engine trouble code is related to Clutch Position Sensor Circuit Malfunction.
Main Cause
The primary reason for P1068 OBD-II Engine Trouble Code is: Ambient Air Temperature Sensor Circuit Low.