P1194 Engine Trouble Code
What is P1194?
With P1194, you may drive for several weeks with a malfunctioning MAF sensor, but expect decreased fuel economy and eventual stalling. Shop replacement costs $240–$400 depending on vehicle. The labour is straightforward, with most cost from the part itself.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P1194 |
P1194 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P1194 Code Structure
Understanding what each digit means in the P1194 powertrain trouble code:
| P | 1 | 1 | 9 | 4 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering | Fuel Rail/System Pressure — Too High | Crankshaft Position Sensor A Circuit Malfunction | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix P1194
Diagnostic Steps:
Poor running symptoms align with MAP sensor malfunction. In some cases, a faulty MAP sensor will not trigger a code. The issue may represent separate wiring concerns requiring individual diagnosis.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on P1194 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
P1194 Description
P1194 OBD-II Trouble Code: ECU A/D Converter is one of the definitions for the P1194; however your vehicles manufacturer may have a different definition for the P1194 code. Please check below for your specific make.
Main Cause
The primary reason for P1194 OBD-II Engine Trouble Code is: Fuel Rail/System Pressure — Too High.