P1464 Engine Trouble Code
What is P1464?
P1464 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P1464 |
P1464 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P1464 Code Structure
Understanding what each digit means in the P1464 powertrain trouble code:
| P | 1 | 4 | 6 | 4 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering | O2 Sensor Heater Circuit Malfunction | Cylinder 4 Contribution/Balance Fault | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix P1464
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
VSS concerns may stem from noisy input signals caused by RFI/EMI from ignition wires, charging circuits, or aftermarket equipment. Verify VSS reads 0 mph when transmission is in Park.
Technical Notes:
P1464 DTC specifically relates to camshaft timing. When cam timing is over-retarded, the check-engine light illuminates and this code sets. Verify VCT solenoid operation and check for contamination.
P1464 Description
P1464 OBD-II Trouble Code: Fuel Level Sensor is one of the definitions for the P1464; however your vehicles manufacturer may have a different definition for the P1464 code. Please check below for your specific make.
Main Cause
The primary reason for P1464 OBD-II Engine Trouble Code is: O2 Sensor Heater Circuit Malfunction.