P167F Engine Trouble Code
What is P167F?
P167F indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P167F |
P167F Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P167F Code Structure
Understanding what each digit means in the P167F powertrain trouble code:
| P | 1 | 6 | 7 | f |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering | Fuel Temperature Sensor B Circuit Range/Performance | Cylinder 10 Contribution/Balance Fault | System Malfunction |
How to Fix P167F
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Excessive air inflow may result from vacuum leaks, dirty sensors, or EGR valves not closing properly. Insufficient fuel can stem from dirty injectors, clogged filters, weak fuel pump, or leaking pressure regulator.
Technical Notes:
P167F DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
P167F Description
P167F engine trouble code is related to System Malfunction.
Main Cause
The primary reason for P167F OBD-II Engine Trouble Code is: Fuel Temperature Sensor B Circuit Range/Performance.