P1704 Engine Trouble Code
What is P1704?
When P1704 code appears, first check your gas cap. Pull over safely, ensure it is tight, and inspect for cracks. A loose or damaged gas cap affects fuel-system pressure and emissions. A replacement cap costs about $3–$10. This simple fix can resolve the code and improve fuel economy.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P1704 |
P1704 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P1704 Code Structure
Understanding what each digit means in the P1704 powertrain trouble code:
| P | 1 | 7 | 0 | 4 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering | Fuel Rail Pressure Sensor Circuit Malfunction | Cold Start Injector 1 Malfunction | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix P1704
Diagnostic Steps:
Oxygen sensors measure exhaust gas oxygen content to optimise air-fuel ratio. This optimisation improves fuel economy and reduces emissions. Sensors degrade over time and require periodic replacement.
Repair Solution:
Disconnected, dirty, or fouled spark plugs commonly prevent proper engine operation. Replace spark plugs every season or 25 hours. Verify proper spark plug gap. If plugs are good, check ignition components: spark plug wires, coils, and ignition module.
Technical Notes:
Parts or components should not be replaced based solely on P1704 DTC. Consult your vehicle service manual for proper diagnostic procedures, possible causes, and required testing before replacement.
P1704 Description
P1704 engine trouble code is related to Timing Reference High Resolution Signal A Too Many Pulses.
Main Cause
The primary reason for P1704 OBD-II Engine Trouble Code is: Fuel Rail Pressure Sensor Circuit Malfunction.