P2414 Engine Trouble Code
What is P2414?
P2414 code can indicate a faulty oxygen sensor, which may eventually damage the catalytic converter (repair cost: $2,000–$2,200). Professional diagnosis costs around $200–$210. Oxygen sensors are often straightforward to replace — check your owner's manual for location and instructions. This issue should be addressed promptly to prevent further damage.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P2414 |
P2414 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P2414 Code Structure
Understanding what each digit means in the P2414 powertrain trouble code:
| P | 2 | 4 | 1 | 4 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | O2 Sensor Heater Circuit Malfunction | Engine Shutoff Solenoid Malfunction | Timing Reference High Resolution Signal A Too Many Pulses |
How to Fix P2414
Diagnostic Steps:
Regarding P2414, carefully inspect the wire harness near the intake manifold bracket, best accessed from below near the oil filter. Look for chafing, pinching, or damaged insulation.
Repair Solution:
Power steering pressure switch monitors system operation. If pressure changes are not detected after calibrated speed transitions, this DTC sets. Verify PSP switch operation and check for circuit opens or shorts.
Technical Notes:
P2414 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
P2414 Description
P2414 engine trouble code is related to Timing Reference High Resolution Signal A Too Many Pulses.
Main Cause
The primary reason for P2414 OBD-II Engine Trouble Code is: O2 Sensor Heater Circuit Malfunction.