P2705 Engine Trouble Code
What is P2705?
P2705 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P2705 |
P2705 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P2705 Code Structure
Understanding what each digit means in the P2705 powertrain trouble code:
| P | 2 | 7 | 0 | 5 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | Fuel Rail Pressure Sensor Circuit Malfunction | Cold Start Injector 1 Malfunction | Crankshaft Position Sensor B Circuit Malfunction |
How to Fix P2705
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Excessive air inflow may result from vacuum leaks, dirty sensors, or EGR valves not closing properly. Insufficient fuel can stem from dirty injectors, clogged filters, weak fuel pump, or leaking pressure regulator.
Technical Notes:
P2705 DTCs can be triggered by upstream issues. For example, a dirty MAF sensor may cause incorrect fuel-trim adjustments, leading oxygen sensors to report mixture problems. Address root causes first.
P2705 Description
P2705 engine trouble code is related to Crankshaft Position Sensor B Circuit Malfunction.
Main Cause
The primary reason for P2705 OBD-II Engine Trouble Code is: Fuel Rail Pressure Sensor Circuit Malfunction.