P3303 Engine Trouble Code
What is P3303?
P3303 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Code: | P3303 |
P3303 Symptoms
Check Engine Light
Illuminated dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration
Starting Problems
Difficulty starting the engine
P3303 Code Structure
Understanding what each digit means in the P3303 powertrain trouble code:
| P | 3 | 3 | 0 | 3 |
|---|---|---|---|---|
| Powertrain Code | Ignition System Or Misfire | Throttle/Pedal Position Sensor/Switch A Circuit Intermittent | Cold Start Injector 1 Malfunction | Exhaust Gas Recirculation Sensor B Circuit High |
How to Fix P3303
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
VSS concerns may stem from noisy input signals caused by RFI/EMI from ignition wires, charging circuits, or aftermarket equipment. Verify VSS reads 0 mph when transmission is in Park.
Technical Notes:
P3303 DTC specifically relates to camshaft timing. When cam timing is over-retarded, the check-engine light illuminates and this code sets. Verify VCT solenoid operation and check for contamination.
P3303 Description
P3303 engine trouble code is related to Exhaust Gas Recirculation Sensor B Circuit High.
Main Cause
The primary reason for P3303 OBD-II Engine Trouble Code is: Throttle/Pedal Position Sensor/Switch A Circuit Intermittent.